FLUID BED DRYER / PROCESSOR


       The Fluid bed dryer works on the principal of creating a fluid turbulence in a granulated or powdery wet   product   by means of hot air
       ( or dehumidified air ) flowing in an upward direction and dry the same to the   required degree   in a careful manner.

    
       Salient Features

  • All contact parts are S.S. 316 as per GMP Standard.

  • Uniform Drying at low temperature.

  • Intrinsically safe earthing system ensure complete elimination of static charge.

  • 65% open Perforated air distribution plate along with Dutch weave mesh.

  • On line sampling Port.

  • Fan motor unit & Filteration unit can be placed in remote areas.

  • heating mode electrical / steam / thermic fluid.

  • Pneumatically operated inflatable seals provided for filter bag and product container sealing with
    pressure switches & FRL to ensure fail safe operation.

  • Top mounted pneumatic cylinder (directly coupled ) for shaking (without wire rope system )

  • minimum handling more Hygienic.

  • 2.5kg. to 500kg. batch capacity

  • Top Spry Granulation

  • Explosion relief disc.



    Safety
          Explosion vent
          
          Explosion vent is provided with rupture disk
    
          Positive Earthing Device
    
          Ensures complete elimination of static charge.
    
          Solid Flow moniter:
    
          To prevent the product losses due to rupture of filter bag.
    
  
 
    Application
    
   The fluid bed drying technique is ideal for the rapid, even drying of chemical, pharmaceutical and food product. The material may be
   in granular, powder or crystalline form. Normally an initial moisture content up to 20% is ideal but materials with higher initial
   moisture content can be dried successfully.
    
   
    Documentation

    Elicon Fluid Bed Dryer comes along with all documentation like DQ, IQ, OQ, and FAT as a part of standard procedure.
     Technical Specification

    Model EP -10 EP -30 EP - 60 EP -120 EP -150 EP -200 EP -250 EP -300
    Bowl Volume (Liters) 35 110 200 425 500 625 780 925
    Batch Size (Kgs) 10-15 30-40 60-75 120-150 150-180 200-230 250-280 300-330
    Heating Load : (kw)
    For Electrical Heating     		6 18 36 54* 60* * * *
    Approx. steam
    Consumption Kgs/hr.
    (Steampressure 3.5 Kg. /cm2)    		 15 25 50 100 130 170 200 250
    Motor (H.P.) 2 5 10 15 20 20 25 30
    Drying Temp C* 50-80 50-80 50-80 50-80 50-80 50-80 50-80 50-80
    Height H1 (Approx) mm 1600 1900 2200 2550 2600 2800 3000 3100
    Height H2 (Approx) mm 2000 2250 3000 3500 3500 3900 4000 4200
    Width (Approx) mm 1050 1400 1550 1800 1850 2000 2100 2150
    Lenth (Approx) mm 800 1250 1500 1700 1700 2000 2100 2200